Unlike other scope companies, we allow the customer to customize their scope down to even the color. Whether it is a different color Type III Hard Anodize, or a Cerecote color, we can match the look of your rifle/gear on the scope. Because we are building all the scopes in house, we don't need to mask off the crucial parts, we coat each part before the scope is assembled for a high quality job.

One of the most important parts of a rifle scope is the objective. The objective determines many qualities of the complete optical system. Magnification, exit pupil and light gathering are some of the most critical points. The larger the objective diameter, the more light will be gathered into the optical system. The smaller the objective, the smaller the exit pupil, and the longer the objective, the more magnification is gained.

Elevation knobs are one part of a scope that gets used a lot and having a repeatable, durable knob will provide many years of use. Whether you are using the EREK, #1 or #3, all knobs are made of stainless on stainless, or stainless on brass. Each knob is hand lapped to insure exact repeatability and accuracy. All knobs use an encapsulated tungsten ball with a stainless threaded housing so our technicians can adjust the tension for the perfect feel.

The windage knob on your scope adjusts for the left and right bullet impact. Made from stainless steel and brass, each windage knob is hand lapped for a perfect thread match between the mating parts. Encapsulated ball detents give the tactile feel that makes for a precision feel.

30mm tubes are standard on all U.S. Optics scopes with a choice of either 34 or 35mm tubes for added elevation travel. If you are looking to improve the distances that you are capable of engaging, you may consider the upgraded larger tube diameter. Some people think that the larger tube diameter provides better light transmission, but this is not the case. Our 1-8X model uses a 34mm standard because of the increased diameter of the erec tor tube and lenses therein.

Parallax becomes very important with the higher magnification scopes and the longer distances that you are shooting. Whether you are using the ERGO objective or the TPAL (turret parallax adjustment), the result of elliminating parallax is the same.

Illumination of the reticle is useful in situations where the reticle can be obscured by a black background/target. We offer different colors for the illumination that will allow the user to contrast with the target. Our push button digital illumination offers 12 positions of intensity from extremely dim to extremely bright. A CR2032 battery powers the module and provides enough power for up to 100 hours of use. With a built in 1 hour auto shut-off, you will not need to replace the battery for some time. Turn on the module by pressing one button, dim or increase intensity by pushing the other two buttons. Once you select the intensity of your choice, you may turn the module off and then when you turn it back on it will resume the previous setting.

Your reticle decision is one that will aid in many points of your scope. If you are choosing MIL, MOA or IPHY we have a reticle for you. Various reticle models have different ranging stadia, line thicknesses and design to aid the operator in hold off's, ranging and fine precision shot placement. If you don't see a reticle that suits your needs, contact us and we can design and build one exactly the way you want it.

Made from 6061-T651 and then Type III hard anodized, the eyepiece housing is as robust as the body and other parts of the scope.

Our rapid focus eyepiece makes adjusting for diopter a quick and simple task. Unlike other scopes, the eyepiece housing stays in place while rotating the eyepiece itself.