Matte Black type III is the hardest scope coating in the industry it is scratch proof and chemical proof.This coating can with stand severe abuse, salt fog tests have been conducted internally and externally by outside military testing. Sulfuric acid is the most widely used solution to produce anodized coating, while coatings thicker than 25 μm (0.001") are known as Type III, hardcoat, hard anodizing, or engineered anodizing. Standards for thick sulfuric anodizing are given by MIL-A-8625 Type III, AMS 2469, BS 5599, BS EN 2536 and the obsolete AMS 2468 and DEF STAN 03-26/1.The Matte Black finish is matte black dye...

Note:  This extends the build time by 2 months

Cerakote coatings are formulated for specific applications and technical requirements. Current Cerakote product lines include coatings specifically for firearms, exhaust systems, pistons and high wear applications. In addition, Cerakote is available in a line of ceramic clear coats. If you want to match the color of your scope to your rifle or any other gear, Cerakote is the product for you.

Note:  This extends the build time by 2 months

Cerakote coatings are formulated for specific applications and technical requirements. Current Cerakote product lines include coatings specifically for firearms, exhaust systems, pistons and high wear applications. In addition, Cerakote is available in a line of ceramic clear coats. If you want to match the color of your scope to your rifle or any other gear, Cerakote is the product for you.

Note:  This extends the build time by 2 months

Cerakote has a unique ceramic structure that out-performs any competitive coating and improves performance in both laboratory and real world settings.

Note:  This extends the build time by 2 months

Cerakote coatings are formulated for specific applications and technical requirements. Current Cerakote product lines include coatings specifically for firearms, exhaust systems, pistons and high wear applications. In addition, Cerakote is available in a line of ceramic clear coats. If you want to match the color of your scope to your rifle or any other gear, Cerakote is the product for you.

Note:  This extends the build time by 2 months

Cerakote coatings are formulated for specific applications and technical requirements. Current Cerakote product lines include coatings specifically for firearms, exhaust systems, pistons and high wear applications. In addition, Cerakote is available in a line of ceramic clear coats. If you want to match the color of your scope to your rifle or any other gear, Cerakote is the product for you.

Note:  This extends the build time by 2 months

Cerakote coatings are formulated for specific applications and technical requirements. Current Cerakote product lines include coatings specifically for firearms, exhaust systems, pistons and high wear applications. In addition, Cerakote is available in a line of ceramic clear coats. If you want to match the color of your scope to your rifle or any other gear, Cerakote is the product for you.

Note:  This extends the build time by 2 months

Cerakote coatings are formulated for specific applications and technical requirements. Current Cerakote product lines include coatings specifically for firearms, exhaust systems, pistons and high wear applications. In addition, Cerakote is available in a line of ceramic clear coats. If you want to match the color of your scope to your rifle or any other gear, Cerakote is the product for you.

Note:  This extends the build time by 2 months

Cerakote coatings are formulated for specific applications and technical requirements. Current Cerakote product lines include coatings specifically for firearms, exhaust systems, pistons and high wear applications. In addition, Cerakote is available in a line of ceramic clear coats. If you want to match the color of your scope to your rifle or any other gear, Cerakote is the product for you.

This is accomplished by a tungstun ball that is incapulated in a stainless threaded housing. All knob parts are either stainless or brass material for accuracy and longevity.

Whether you are using this for your elevation or windage, the knob is able to be covered by a screw on aluminum cover. Knobs are laser engraved with clear markings for each 1/10 MIL click, as well as numbered for each full MIL and 1/2 MIL.

This is accomplished by a tungstun ball that is incapulated in a stainless threaded housing. All knob parts are either stainless or brass material for accuracy and longevity.

Whether you are using this for your elevation or windage, the knob is able to be covered by a screw on aluminum cover.

Knobs are laser engraved with clear markings for each 1/4 SMOA click, as well as numbered for each full SMOA.

Unlike the U.S.#1, this knob does not have the option of a screw on protective cover.

Unlike the U.S.#1, this knob does not have the option of a screw on protective cover.

The large diameter and the low height gives it a very uniques look. With 90 clicks per one revolution, it allows for a large amount of travel in a single turn. With 1/10 MIL click values you will get a total of 9 MIL's per one revolution.

The center rough zeroing screw allows the user to set where in the knob's travel the beginning and ending is. So you can adjsut where a zero stop is located, or how many clicks below zero is set.

After the zero is set, the user must replace the top washer with the one provided with the tool kit, this will ensure an environmentally sealed scope.

The large diameter and the low height gives it a very uniques look. With 90 clicks per one revolution, it allows for a large amount of travel in a single turn.

With 1/4 SMOA click values you will get a total of 22.5 SMOA per one revolution.

The center rough zeroing screw allows the user to set where in the knob's travel the beginning and ending is.

So you can adjsut where a zero stop is located, or how many clicks below zero is set.

After the zero is set, the user must replace the top washer with the one provided with the tool kit, this will ensure an environmentally sealed scope.

This is accomplished by a tungstun ball that is incapulated in a stainless threaded housing. All knob parts are either stainless or brass material for accuracy and longevity.

Whether you are using this for your elevation or windage, the knob is able to be covered by a screw on aluminum cover.

Knobs are laser engraved with clear markings for each 1/10 MIL click, as well as numbered for each full MIL and 1/2 MIL.

This is accomplished by a tungstun ball that is incapulated in a stainless threaded housing. All knob parts are either stainless or brass material for accuracy and longevity.

Whether you are using this for your elevation or windage, the knob is able to be covered by a screw on aluminum cover.

Knobs are laser engraved with clear markings for each 1/4 SMOA click, as well as numbered for each full SMOA.

Unlike the U.S.#1, this knob does not have the option of a screw on protective cover.

Unlike the U.S.#1, this knob does not have the option of a screw on protective cover.

This unit allows the user to set a needed intensity, then turn off the unit and then back on to the prior setting.

There is an automatic power shut off after 1 hour if no buttons are pushed. Battery life is 100 hours on the highest setting. A 2032 coin battery powers the unit.

This unit allows the user to set a needed intensity, then turn off the unit and then back on to the prior setting.

There is an automatic power shut off after 1 hour if no buttons are pushed. Battery life is 100 hours on the highest setting. A 2032 coin battery powers the unit.

This unit allows the user to set a needed intensity, then turn off the unit and then back on to the prior setting.

There is an automatic power shut off after 1 hour if no buttons are pushed. Battery life is 100 hours on the highest setting. A 2032 coin battery powers the unit.