Discontinued - Short Range Optics

SR-4C

 Compact, Lightweight, Durable

Versatility always seems to come full circle. Red dot sights have proven to be an indispensable tool for CQB and rapid target acquisition. Enter the SR‑4C, it integrates the strengths of a red dot sight into a compact, unitized package with the added benefit of a 1-4X range of magnification.

The SR-4C features a true 1X power, 4 MOA, daylight visible red dot sight rolled up in a rugged 30mm hard-anodized aluminum body. The second focal plane red dot can be set at any of 12 pre-programmed intensity settings. The lower four settings are night vision compatible. The SR-4C comes standard with a non-lit, MIL Scale reticle for ranging and acquiring targets at short distances to 400+ yards and in close quarters conditions.

When mission accomplishment depends on speed and precision the SR-4C raises the bar and the brass ring.

MIL Scale Reticle

The MIL Scale reticle in the SR-4C is simple yet an effective reticle.  The MIL hash marks on the horizontal and vertical axes are 1 MIL apart.  The larger hash marks measure 2 MIL in height/width and smaller hash marks measure 1 MIL in height/width.  The hash marks represent a total of 6 MILs of adjustment below the horizontal axis; 1 MIL of adjustment above the horizontal axis and 6 MILs of adjustment to the left and right of the vertical axis.

H50 Reticle

Allows quick, precise shots from point blank out to 400 yards. The grid pattern represents a total of 12 MILs of adjustment below the horizontal axis; 2 MILs of adjustment above the horizontal axis and 10 MILs of adjustment to the left and right of the vertical axis which also provides leads in 4 MPH increments for moving targets. The heavy bold ring is ideal for rapid target engagement at low power magnification.

 Common Characteristics

  • Magnification: 1-4x
  • Exit Pupil Diameter: 6.23mm
  • Diopter: +2 to -3
  • Field of View @ 1x: 110’ @ 100 yards
  • Field of View @ 4x: 33’ @ 100 yards
  • Eye Relief: 3.25” / 8.3cm
  • Objective Lens Housing Diameter: 1.18” / 30mm
  • Tube Diameter: 1.18” / 30mm
  • Tube Length: 5.47” / 138.8mm
  • Overall Length: 9.25” / 23.5cm
  • Objective Lens Diameter: 0.87” / 22mm
  • Ocular Lens Diameter: 1.26” / 32mm
  • Weight: 19.8oz / .562kg
  • Dot Illumination: Red
  • Battery: Lithium Coin, CR2032
  • Battery Runtime: Up to 8,000 Hours
  • Material: Aluminum, 6061-T6
  • Finish Color: Matte Black
  • Finish Type: Type III Hard Anodized

 SR-4C Specifications

  • Elevation Knob: 2/10 MIL Zeroing
  • Total Elevation Travel: 50+
  • Windage Knob: 2/10 MIL Zeroing
  • Windage Adjustment Range: 20L / 20R
  • Reticle: MIL Scale

 

 SR-4CH50 Specifications

  • Elevation Knob: 2/10 MIL Zeroing
  • Total Elevation Travel: 50+
  • Windage Knob: 2/10 MIL Zeroing
  • Windage Adjustment Range: 20L / 20R
  • Reticle: Horus Vision H50, First Focal Plane

SR-6S

 Lightweight & Durable

A little goes a long way. Whether you are shooting against the clock, kicking in a door or tracking that shot of a lifetime, more detail without the hassle of sensitive movement from high magnification is exactly what the SR-6S delivers. The JNG MIL reticle is ideal for fast and accurate shot placement throughout the magnification range. The SR-6S facilitates a clear and comfortable sight picture for long days on the range and in the field while making target acquisition quick and easy.

Featuring a 1.5-6X magnification range through a generous field of view, the SR-6S is ideal for engaging targets at distances from point blank out to 600+ yards. An illuminated JNG MIL reticle facilitates quick center-mass target acquisition in any lighting condition via the outer ring and .5 MIL hash marks on the stadia lines.

JNG Reticle

The JNG reticle is a MIL based reticle uses the proven circle method of quick acquisition, for lower magnifications, as well as a ranging reticle. ½ MIL increments make up all four quadrants of the crosshair, a total of 10 MILs for the bottom/right/left and the upper with 6 MIL’s. Heavy duplex posts to the outer edge aid in low magnification aiming as well as keeping the weapon level.

 Common Characteristics

  • Magnification: 1.5-6x
  • Exit Pupil Diameter: 4.67mm
  • Diopter: +2 to -3
  • Field of View @ 1.5x: 64.6’ @ 100 yards
  • Field of View @ 6x: 25.3’ @ 100 yards
  • Eye Relief: 3.5” / 8.9cm
  • Objective Lens Housing Diameter: 1.18” / 30mm
  • Tube Diameter: 1.18” / 30mm
  • Tube Length: 5.47” / 138.8mm
  • Overall Length: 9.25” / 23.5cm
  • Objective Lens Diameter: 0.87” / 22mm
  • Ocular Lens Diameter: 1.26” / 32mm
  • Weight: 1.24lbs / .562kg
  • Dot Illumination: N/A
  • Battery: Lithium Coin, CR2032
  • Battery Runtime: Up to 10,000 Hours
  • Material: Aluminum, 6061-T6
  • Finish Color: Matte Black
  • Finish Type: Type III Hard Anodized

 SR-6S Specifications

  • Elevation Knob: 1/10 MIL Slimline
  • Total Elevation Travel: 80+
  • Windage Knob: 1/10 MIL Slimline
  • Windage Adjustment Range: 418 Clicks per Revolution
  • Reticle: JNG MIL, First Focal Plane

SR-8C

 Lightweight & Durable

The age old question of speed versus versatility can be argued for days when it comes to scopes. Why argue when you can have both? The SR-8 series of rifle scopes provide a generous magnification range that includes a true 1X power setting at the low end through a high end of 8X. All available models are ideal for engaging targets at distances ranging from point blank out to 800+ yards.

The SR-8C incorporates a daylight visible, 4 MOA red dot sight in the second focal plane that is precisely positioned in the center of an 8C MIL reticle in the first focal plane. The illuminated dot is optimized at the lowest power setting for rapid target engagement in any condition and subtends at all magnification settings from 1X through 8X. Built for long range target engagement, the SR-8C-H50 features a Horus Vision H50 reticle.

MIL Scale Reticle

This reticle is the FFP reticle that is used in conjunction with the RFP in our DFP scopes. This reticle is MIL based crosshair has hash marks at every full MIL out to 6 MIL’s on the right/left and bottom axis, top axis has one MIL above center. A heavy duplex starts at 18 MIL’s from the center on all four axis.

H50 Reticle

Allows quick, precise shots from point blank out to 400 yards. The grid pattern represents a total of 12 MILs of adjustment below the horizontal axis; 2 MILs of adjustment above the horizontal axis and 10 MILs of adjustment to the left and right of the vertical axis which also provides leads in 4 MPH increments for moving targets. The heavy bold ring is ideal for rapid target engagement at low power magnification.

Common Characteristics

  • Magnification: 1-8x
  • Exit Pupil Diameter: 2mm
  • Diopter: +2 to -3
  • Field of View @ 1x: 83.25’ @ 100 yards
  • Field of View @ 8x: 10.75’ @ 100 yards
  • Eye Relief: 3.7” / 9.4cm
  • Objective Lens Housing Diameter: 1.38” / 35mm
  • Tube Diameter: 1.18” / 30mm
  • Tube Length: 5.94” / 150.8mm
  • Overall Length: 12” / 30.5cm
  • Objective Lens Diameter: 1.06” / 27mm
  • Ocular Lens Diameter: 1.26” / 32mm
  • Weight: 2.26oz / .726kg
  • Dot Illumination: Red
  • Battery: Lithium Coin, CR2032
  • Battery Runtime: Up to 8,000 Hours
  • Material: Aluminum, 6061-T6
  • Finish Color: Matte Black
  • Finish Type: Type III Hard Anodized

SR-8C Specifications

  • Elevation Knob: 2/10 MIL Zeroing
  • Total Elevation Travel: 38+
  • Windage Knob: 2/10 MIL Zeroing
  • Windage Adjustment Range: 11L/11R
  • Reticle: BC, First Focal Plane

Discontinued - Mid Range Optics

MR-10

 Versatile, Durable, Accurate

The MR-10 series stands out when a scope has to be versatile and highly effective at both extremes of its magnification range. A 37mm objective lens sits in front of a Turret Parallax Adjustment Locator (TPAL) system guaranteeing the sharpest image resolution possible throughout the 1.8-10X power magnification range. Target acquisition for accurate shots are effortlessly made from near pointblank to 1,000+ yards with the MR-10.

When weather and light conditions are less than optimal the 12-position illuminated reticle system provides yet another advantage for taking your best possible shot. All MR-10 optics feature an Erector Repositioning Elevation Knob (EREK) system that maximizes gross elevation travel adjustment for maximum elevation adjustment where traditional turrets leave off. MIL and MOA reticle options are available in the MR-10 product line.

 Mil Dot Reticle

The MIL Dot is the most known tactical style reticle used in scopes today. From center of dot to center of dot is 1 MIL, each dot is 3/4 MOA in diameter.

NOTE: This reticle is currently unavailable due to an upcoming product release. If you have any further questions, call us at 714-582-1956.

 MOA Scale Type 1

This reticle was designed to be a simple MOA reticle that allows for precise hold over shots and ranging. Each hash mark is 2 MOA with numbering every 10 MOA for reference. A total of 40 MOA on the vertical axis below the center, and a total of 30 MOA on each side of center on the horizontal axis.

NOTE: This reticle is currently unavailable due to an upcoming product release. If you have any further questions, call us at 714-582-1956.

 GAP MIL Scale

Designed in conjunction with George from GA Precision, this MIL based reticle offers full MIL as well as ½MIL increments. A total of 9 MIL’s from the center down on the vertical axis, and 4 MIL’s left and right of center on the horizontal axis.

.

 JNG MOA Reticle

This MOA based reticle uses the proven circle method of quick acquisition, for lower magnifications, as well as a ranging reticle. 2 MOA increments make up all four quadrants of the crosshair, a total of 36 MOA for the bottom/right/left and the upper with 24 MOA. Heavy duplex posts to the outer edge aid in low magnification aiming as well as keeping the weapon level.

NOTE: This reticle is currently unavailable due to an upcoming product release. If you have any further questions, call us at 714-582-1956.

 RDP MIL Reticle

Designed in conjunction with R&D Precision, the RDP MIL-Scale offers a very fine center crosshair for extremely long distance shooting, or for very precise engagement of small targets. The vertical axis below the horizontal line has a total of 15 MIL’s divided into ½MIL increments. The right and left sides of the horizontal axis are divided into 1 MIL increments for a total of 15 MIL’s.

NOTE: This reticle is currently unavailable due to an upcoming product release. If you have any further questions, call us at 714-582-1956.

 JNG MIL Reticle

This MIL based reticle uses the proven circle method of quick acquisition, for lower magnifications, as well as a ranging reticle. ½MIL increments make up all four quadrants of the crosshair, a total of 10 MIL’s for the bottom/right/left and the upper with 6 MIL’s. Heavy duplex posts to the outer edge aid in low magnification aiming as well as keeping the weapon level.

NOTE: This reticle is currently unavailable due to an upcoming product release. If you have any further questions, call us at 714-582-1956.

Horus Vision H425 Reticle

The Horus Vision H425 is designed for ease of use to meet the needs of the hunter and marksman. As part of the MR-10 series of rifle scopes the H425 reticle includes an inverted “L” range finder in the lower left quadrant that is calibrated in shooters minute of angle (SMOA) or inch per hundred yards (IPHY) for quick and precise calculation of range and distances. The H425 grid has 8 horizontal stadia lines which represent 8 Mils of elevation hold. The grid lines allow the shooter to correct for elevation and windage without turning knobs or counting clicks. The smaller, secondary horizontal lines allow for precise elevation holds with standard spacing between each secondary horizontal line set at 1 mil to compensate for wind, drift, speed of target, etc.

NOTE: This reticle is currently unavailable due to an upcoming product release. If you have any further questions, call us at 714-582-1956.

Common Characteristics

  • Magnification: 1.8-10x
  • Exit Pupil Diameter: 2mm
  • Diopter: +2 to -3
  • Parallax Adjustment: 30yds to ∞
  • Field of View @ 1.8x: 41.6’ @ 100 yards
  • Field of View @ 10x: 12.8’ @ 100 yards
  • Eye Relief: 3.25” / 8.9cm
  • Objective Lens Housing Diameter: 1.87” / 47.4mm
  • Tube Diameter: 1.18” / 30mm
  • Tube Length: 6.12” / 155.5mm
  • Overall Length: 12” / 30.5cm
  • Objective Lens Diameter: 1.46” / 37mm
  • Ocular Lens Diameter: 1.26” / 32mm
  • Weight: 28oz / .794kg
  • Dot Illumination: Red
  • Battery: Lithium Coin, CR2032
  • Battery Runtime: Up to 8,000 Hours
  • Material: Aluminum, 6061-T6
  • Finish Color: Matte Black

MR-10MIL Specifications

  • Elevation Knob: 1/10 MIL EREK
  • Total Elevation Travel: 16+
  • Windage Knob: US#1, 1/10 MIL
  • Windage Adjustment Range: 11L / 11R
  • Reticle: MIL Scale GAP, First Focal Plane

 

 

 

 

MR-10MOA Specifications

  • Elevation Knob: ¼ IPHY EREK
  • Total Elevation Travel: 57.5+ IPHY
  • Windage Knob: US#1, ¼ IPHY
  • Windage Adjustment Range: 39L / 39R
  • Reticle: MOA Scale Type 1, First Focal Plane

 

 

 

ST-10

 Durable, Accurate, Extremely Simple

The ST-10 fixed 10-power rifle scope is the perfect solution for the shooter who is seeking simplicity in function without sacrificing optical clarity and mechanical precision at near and far range. A 37mm objective lens sits in front of a Turret Parallax Adjustment Locator (TPAL) system guaranteeing the sharpest image resolution possible at 10X magnification, making target acquisition for accurate shots beyond 1,000 yards possible.

ST-10 optics feature an Erector Repositioning Elevation Knob (EREK) system with 1/10 MIL or ¼ inch per hundred yards (IPHY) click values that maximizes gross elevation travel adjustment. The same mechanical precision engineered into the EREK knob is incorporated into the US#1 windage knob to ensure that reticle adjustment is precise.

A 12-position illuminated reticle system provides an advantage for taking your best shot in low light conditions. Housed in a rugged, Type III hard-anodized 6061-T6 aircraft grade aluminum body, the ST-10MIL will always hold zero from daily use and in the harshest field conditions.

 Mil Dot Reticle

The MIL Dot is the most known tactical style reticle used in scopes today. From center of dot to center of dot is 1 MIL, each dot is 3/4 MOA in diameter.

 MOA Scale Type 1

This reticle was designed to be a simple MOA reticle that allows for precise hold over shots and ranging. Each hash mark is 2 MOA with numbering every 10 MOA for reference. A total of 40 MOA on the vertical axis below the center, and a total of 30 MOA on each side of center on the horizontal axis.

 GAP MIL Scale

Designed in conjunction with George from GA Precision, this MIL based reticle offers full MIL as well as ½MIL increments. A total of 9 MIL’s from the center down on the vertical axis, and 4 MIL’s left and right of center on the horizontal axis.

.

 JNG MOA Reticle

This MOA based reticle uses the proven circle method of quick acquisition, for lower magnifications, as well as a ranging reticle. 2 MOA increments make up all four quadrants of the crosshair, a total of 36 MOA for the bottom/right/left and the upper with 24 MOA. Heavy duplex posts to the outer edge aid in low magnification aiming as well as keeping the weapon level.

 RDP MIL Reticle

Designed in conjunction with R&D Precision, the RDP MIL-Scale offers a very fine center crosshair for extremely long distance shooting, or for very precise engagement of small targets. The vertical axis below the horizontal line has a total of 15 MIL’s divided into ½MIL increments. The right and left sides of the horizontal axis are divided into 1 MIL increments for a total of 15 MIL’s.

 JNG MIL Reticle

This MIL based reticle uses the proven circle method of quick acquisition, for lower magnifications, as well as a ranging reticle. ½MIL increments make up all four quadrants of the crosshair, a total of 10 MIL’s for the bottom/right/left and the upper with 6 MIL’s. Heavy duplex posts to the outer edge aid in low magnification aiming as well as keeping the weapon level.

Horus Vision H425 Reticle

The Horus Vision H425 is designed for ease of use to meet the needs of the hunter and marksman. As part of the MR-10 series of rifle scopes the H425 reticle includes an inverted “L” range finder in the lower left quadrant that is calibrated in shooters minute of angle (SMOA) or inch per hundred yards (IPHY) for quick and precise calculation of range and distances. The H425 grid has 8 horizontal stadia lines which represent 8 Mils of elevation hold. The grid lines allow the shooter to correct for elevation and windage without turning knobs or counting clicks. The smaller, secondary horizontal lines allow for precise elevation holds with standard spacing between each secondary horizontal line set at 1 mil to compensate for wind, drift, speed of target, etc.

Common Characteristics

  • Magnification: 10x
  • Exit Pupil Diameter: 4mm
  • Diopter: +2 to -3
  • Parallax Adjustment: 30yds to ∞
  • Field of View @ 10x: 12.8’ @ 100 yards
  • Eye Relief: 3.5” / 8.9cm
  • Objective Lens Housing Diameter: 1.87” / 47.4mm
  • Tube Diameter: 1.18” / 30mm
  • Tube Length: 6.12” / 155.5mm
  • Overall Length: 12.8” / 32.4cm
  • Objective Lens Diameter: 1.46” / 37mm
  • Ocular Lens Diameter: 1.26” / 32mm
  • Weight: 29.3oz / .831kg
  • Reticle Illumination: Red
  • Battery: Lithium Coin, CR2032
  • Battery Runtime: Up to 8,000 Hours
  • Material: Aluminum, 6061-T6
  • Finish Color: Matte Black
  • Finish Type: Type III Hard Anodized

ST-10MIL Specifications

  • Elevation Knob: 1/10 MIL EREK
  • Total Elevation Travel: 16+
  • Windage Knob: US#1, 1/10 MIL
  • Windage Adjustment Range: 11L / 11R
  • Reticle: MIL Scale GAP, First Focal Plane

 

 

 

 

ST-10MOA Specifications

  • Elevation Knob: ¼ IPHY EREK
  • Total Elevation Travel: 57.5+ IPHY
  • Windage Knob: US#1, ¼ IPHY
  • Windage Adjustment Range: 39L / 39R
  • Reticle: MOA Scale Type 1, First Focal Plane

 

Discontinued - Long Range Optics

lr-17 us optics scope

LR-17

 Long Range Meets Versatility

Sometimes there is more to making a shot at extended ranges than you expect, and especially when target identification becomes a deciding factor. With this in mind, the LR-17 series scopes provide the shooter a decisive advantage when engaging targets beyond 1,500 yards. A 44mm objective lens sits in front of a Turret Parallax Adjustment Locator (TPAL) system guaranteeing the sharpest image resolution possible throughout its 3.2-17X power magnification range. Target acquisition for accurate shots beyond 1,500 yards with proper target identification can be made with confidence when the power ring on the LR-17 is cranked all the way up.

When weather and light conditions are less than optimal the 12-position illuminated reticle system provides yet another advantage for taking your best possible shot. All LR-17 scopes feature an Erector Repositioning Elevation Knob (EREK) system that maximizes gross elevation travel adjustment for maximum elevation adjustment where traditional turrets leave off. MIL, MOA and Horus reticle options are available in the LR-17 product line.

 Gen II XR Reticle

The Gen II XR reticle in the LR-17 features hold over points below zero to better facilitate range estimation and trajectory compensation. The reticle incorporates alternating hash marks and dots that are spaced out in ½ MIL increments.  The hash marks and dots represent 5 MILs of total elevation adjustment above the horizontal axis; 10 MILs of elevation adjustment below horizontal axis and 5 MILs of windage adjustment to the left and right of the vertical axis.  The Gen II XR reticle is thinner to obscure less of the target for a cleaner image.

NOTE: This reticle is currently unavailable due to an upcoming product release. If you have any further questions, call us at 714-582-1956.

Horus Vision H102 Reticle

The Horus Vision H102 in the LR-17 was designed for the entry-level rifleman, designated marksman or sniper. Features include but are not limited to targeting ovals, leads for moving targets and a range finder. The grid pattern represents a total of 27 MILs of adjustment below the horizontal axis; 30.5 MILs of adjustment above the horizontal axis and 30.5 MILs of adjustment to the left and right of the vertical axis.  The H102 also allows for wind correction as well as leading targets moving up to 60 miles per hour.

NOTE: This reticle is currently unavailable due to an upcoming product release. If you have any further questions, call us at 714-582-1956.

 Horus Vision H59 Reticle

The Horus Vision H59 Reticle is a “field-tuned” version of our Horus Vision H58. We widened the horizontal grid by one mil for increased wind holdover. And the center cross has been turned into a “broken cross” so groupings are less obscured and more easily seen.

MIL Scale GAP Reticle

The MIL Scale GAP Reticle in the LR-17 features full MIL and ½ MIL hash marks that are laid out in a clean display. The full MIL hash marks are numbered every 2 MILs for quick and easy reference.  The hash marks represent a total of 9 MILs of adjustment below the horizontal axis; 4 MILs of adjustment above the horizontal axis and 4 MILs of adjustment to the left and right of the vertical axis.

MDMOA Reticle

The MDMOA reticle in the LR-17MOA is based on the standard Shooters Minute of Angle, also known as Inch Per Hundred Yards (IPHY).  The reticle provides 40 MOA of adjustment below the horizontal axis; 20 MOA of adjustment above the horizontal axis and 30 MOA to the left and right of the vertical axis. 1 MOA increments are used on all four axes for the finer ranging capability.  Dots located on each 10 MOA mark, the center of the crosshair (4 MOA total), and the heavy duplex lines are illuminated red via a 12-position rheostat for low light conditions.

NOTE: This reticle is currently unavailable due to an upcoming product release. If you have any further questions, call us at 714-582-1956.

MIL Scale MPR Reticle

The MIL Scale MPR Reticle in the LR-17. MPR is one of the most versatile reticles when it comes to providing MIL ranging capability.  The hash marks can be used to provide ranging and hold-over reference points as low as .2 MIL and up to 10 MIL on the left and right of the horizontal axis and from .2 MILs to 15 MILs from top to bottom of the vertical axis.   A total of 10 MILs of adjustment are below the horizontal axis; 5 MILs of adjustment are above the horizontal axis and 5 MILs of adjustment to the left and right of the vertical axis.

NOTE: This reticle is currently unavailable due to an upcoming product release. If you have any further questions, call us at 714-582-1956.

PCMOA Reticle

The PCMOA reticle in the LR-17PCMOA is based on the standard Shooters Minute of Angle, also known as Inch Per Hundred Yards (IPHY).  The reticle provides 40 MOA below the horizontal axis; 40 MOA above the horizontal axis and 40 MOA to the left and right of the vertical axis. 1 MOA increments are used on the horizontal axis up to 12 MOA. 1 MOA increments on the vertical and horizontal axes represent the first 11 marks; beyond 10 MOA the hash marks represent 2 MOA out to 40 MOA.  A 12-position rheostat illuminates the entire reticle red for low-light use.

NOTE: This reticle is currently unavailable due to an upcoming product release. If you have any further questions, call us at 714-582-1956.

Gen 2 Mil-Dot Reticle

Patented by Premier Reticles, the GEN 2® reticle offers the standard MIL dot with ½MIL increments.

NOTE: This reticle is currently unavailable due to an upcoming product release. If you have any further questions, call us at 714-582-1956.

H37 Reticle

Designed and Patented by Horus Vision, the H-37 offers a MIL based reticle that works with or without the optional Horus Ballistic software. Please see Horus Vision’s website for complete instructions on the use of this reticle.

Mil Dot Reticle

Not much to say here, the MIL Dot is the most known tactical style reticle used in scopes today. From center of dot to center of dot is 1 MIL, each dot is 3/4 MOA in diameter.

NOTE: This reticle is currently unavailable due to an upcoming product release. If you have any further questions, call us at 714-582-1956.

MOA Scale Type 1 Reticle

This reticle was designed to be a simple MOA reticle that allows for precise hold over shots and ranging. Each hash mark is 2 MOA with numbering every 10 MOA for reference. A total of 40 MOA on the vertical axis below the center, and a total of 30 MOA on each side of center on the horizontal axis.

NOTE: This reticle is currently unavailable due to an upcoming product release. If you have any further questions, call us at 714-582-1956.

RDP MIL Reticle

Designed in conjunction with R&D Precision, the RDP MIL-Scale offers a very fine center crosshair for extremely long distance shooting, or for very precise engagement of small targets. The vertical axis below the horizontal line has a total of 15 MIL’s divided into ½MIL increments. The right and left sides of the horizontal axis are divided into 1 MIL increments for a total of 15 MIL’s.

NOTE: This reticle is currently unavailable due to an upcoming product release. If you have any further questions, call us at 714-582-1956.

RDP MOA Reticle

Designed in conjunction with R&D Precision, the RDP MOA reticle offers a very fine center crosshair that is 4 MOA on the vertical and horizontal axis that is only 0.07 MOA in thickness. This allows for shooting at very fine objects, or to allow long distance targets not to be covered by the crosshair. The lower vertical axis is broken into 2 MOA increments with a total of 40 MOA. The left and right side axis is divided into 5 MOA increments for a total of 30 MOA.

 

Common Characteristics

  • Magnification: 3.2-17x
  • Exit Pupil Diameter: 3mm
  • Diopter: +2 to -3
  • Parallax Adjustment: 50yds to ∞
  • Field of View @ 3.2x: 25.3’ @ 100 yards
  • Field of View @ 17x: 8.3’ @ 100 yards
  • Eye Relief: 3.5” / 8.9cm
  • Objective Lens Housing Diameter: 2.230” / 56.642mm
  • Tube Diameter: 1.18” / 30mm
  • Tube Length: 6.2” / 157mm
  • Overall Length: 16.5” / 41.9cm
  • Objective Lens Diameter: 1.763” / 44mm
  • Ocular Lens Diameter: 1.26” / 32mm
  • Weight: 33.6oz / .95kg
  • Reticle Illumination: Red
  • Battery: Lithium Coin, CR2032
  • Battery Runtime: Up to 8,000 Hours
  • Material: Aluminum, 6061-T6
  • Finish Color: Matte Black
  • Finish Type: Type III Hard Anodized

LR-17MIL Specifications

  • Elevation Knob: 1/10 MIL EREK
  • Total Elevation Travel: 16+
  • Windage Knob: US#1, 1/10 MIL
  • Windage Adjustment Range: 11L / 11R
  • Reticle: MIL Scale GAP, First Focal Plane

 

 

 

 

LR-17MOA Specifications

  • Elevation Knob: ¼ IPHY EREK
  • Total Elevation Travel: 57.5+ IPHY
  • Windage Knob: US#1, ¼ IPHY
  • Windage Adjustment Range: 39L / 39R
  • Reticle: MOA Scale Type 1, First Focal Plane

Discontinued - Extreme Range Optics

er-25 us optics scope

ER-25

 No Impossible Shot

Have you heard of the impossible shot? Not if you have an ER-25 mounted to your shooting stick. With the right caliber and rifle, shots beyond 2,000 yards become a reality with the ER-25 series scopes. A 58mm objective lens sits in front of a Turret Parallax Adjustment Locator (TPAL) system guaranteeing the sharpest image resolution possible throughout the 5-25X power magnification range and at distances past 2,000 yards. Target acquisition for accurate shots beyond 2,000 yards is possible when dialing the power ring of an ER-25 to maximum power.

When weather and light conditions are less than optimal, the 12-position illuminated reticle system provides yet another advantage for taking your best possible shot. All ER‑25 optics feature an Erector Repositioning Elevation Knob (EREK) system that maximizes gross elevation travel adjustment for maximum elevation adjustment where traditional turrets leave off beyond 2,000 yards. MIL, MOA and Horus reticle options are available in the ER-25 product line.

Common Characteristics

  • Magnification: 5-25x
  • Exit Pupil Diameter: 2.7mm
  • Diopter: +2 to -3
  • Parallax Adjustment: 25yds to ∞
  • Field of View @ 5x: 16.6’ @ 100 yards
  • Field of View @ 25x: 5.3’ @ 100 yards
  • Eye Relief: 3.5” / 8.9cm
  • Objective Lens Housing Diameter: 2.65” / 66mm
  • Tube Diameter: 1.34” / 34mm
  • Tube Length: 6.6” / 168mm
  • Overall Length: 18” / 45.7cm
  • Objective Lens Diameter: 2.28” / 58mm
  • Ocular Lens Diameter: 1.26” / 32mm
  • Weight: 40oz / 1.13kg
  • Reticle Illumination: Red
  • Battery: Lithium Coin, CR2032
  • Battery Runtime: Up to 8,000 Hours
  • Material: Aluminum, 6061-T6
  • Finish Color: Matte Black

ER-25MIL Specifications

  • Elevation Knob: 1/10 MIL EREK
  • Total Elevation Travel: 26.5+
  • Windage Knob: US#3, 1/10 MIL
  • Windage Adjustment Range: 8L / 8R
  • Reticle: MIL Scale GAP, First Focal Plane

 

 

 

 

ER-25MOA Specifications

  • Elevation Knob: ¼ IPHY EREK
  • Total Elevation Travel: 95+ IPHY
  • Windage Knob: US#3, ¼ IPHY
  • Windage Adjustment Range: 28L / 28R
  • Reticle: MDMOA, First Focal Plane

ER-25 Reticles

MIL Scale GAP Reticle

Designed in conjunction with George from GA Precision, this MIL based reticle offers full MIL as well as ½MIL increments. A total of 9 MIL’s from the center down on the vertical axis, and 4 MIL’s left and right of center on the horizontal axis.

 Mil Dot Reticle

The MIL Dot is the most known tactical style reticle used in scopes today. From center of dot to center of dot is 1 MIL, each dot is 3/4 MOA in diameter.

NOTE: This reticle is currently unavailable due to an upcoming product release. If you have any further questions, call us at 714-582-1956.

Gen 2 Mil-Dot Reticle

Patented by Premier Reticles, the GEN 2® reticle offers the standard MIL dot with ½MIL increments.

NOTE: This reticle is currently unavailable due to an upcoming product release. If you have any further questions, call us at 714-582-1956.

Gen 2 XR Reticle 

Patented by Premier Reticles, the GEN 2 XR combines all the uses of the standard MIL Dot reticle, but also offers ½MIL increments. A series of dots and crosses make up the “Christmas Tree” design in the lower portion of the reticle.

NOTE: This reticle is currently unavailable due to an upcoming product release. If you have any further questions, call us at 714-582-1956.

 MIL Scale MPR

Designed by one of our customers, the MPR MIL-Scale offers a twist on the normal divisions of a full MIL. Full MIL’s are divided up with ½MIL as well as 0.2 and 0.3 MIL increments. A total of 10 MIL’s on the lower vertical axis, 5 MIL’s on the upper, and 5 MIL’s on the left and right side axis.

NOTE: This reticle is currently unavailable due to an upcoming product release. If you have any further questions, call us at 714-582-1956.

 RDP MIL Reticle

Designed in conjunction with R&D Precision, the RDP MIL-Scale offers a very fine center crosshair for extremely long distance shooting, or for very precise engagement of small targets. The vertical axis below the horizontal line has a total of 15 MIL’s divided into ½MIL increments. The right and left sides of the horizontal axis are divided into 1 MIL increments for a total of 15 MIL’s.

NOTE: This reticle is currently unavailable due to an upcoming product release. If you have any further questions, call us at 714-582-1956.

H27 Reticle

Designed and Patented by Horus Vision, the H-27 offers a MIL based reticle that works with or without the optional Horus Ballistic software. Please see Horus Vision’s website for complete instructions on the use of this reticle.

NOTE: This reticle is currently unavailable due to an upcoming product release. If you have any further questions, call us at 714-582-1956.

H37 Reticle

Designed and Patented by Horus Vision, the H-37 offers a MIL based reticle that works with or without the optional Horus Ballistic software. Please see Horus Vision’s website for complete instructions on the use of this reticle.

NOTE: This reticle is currently unavailable due to an upcoming product release. If you have any further questions, call us at 714-582-1956.

 H59 Reticle

The Horus Vision H59 reticle is a “field-tuned” version of our H58. We widened the horizontal grid by one mil for increased wind holdover. And the center cross has been turned into a “broken cross” so groupings are less obscured and more easily seen.

 H102 Reticle

The H102 reticle is designed for the entry-level Rifleman, the Designated Rifleman and the experienced Sniper. Offered in the LR-17 and ER-25 series riflescopes, the H102 grid has 15 horizontal stadia lines, which represent 15+ Mils of elevation hold. The grid lines allow the shooter to correct for elevation and windage without turning knobs or counting clicks. The H102 reticle is packed with features including an inverted “L” range finder, 5 ballistic targeting ovals for rapid target engagement; wind holds of up to 20 MPH and leads for moving vehicles at speeds of up to 60 MPH. The H102 also features a small circle around center cross hair which allows engagements from point blank range to 300 meters on a 6 ft. target that fits inside circle and is also used a lead for a fast walking target moving at 4 MPH.

NOTE: This reticle is currently unavailable due to an upcoming product release. If you have any further questions, call us at 714-582-1956.

 MOA Scale Type 1 Reticle

This reticle was designed to be a simple MOA reticle that allows for precise hold over shots and ranging. Each hash mark is 2 MOA with numbering every 10 MOA for reference. A total of 40 MOA on the vertical axis below the center, and a total of 30 MOA on each side of center on the horizontal axis.

NOTE: This reticle is currently unavailable due to an upcoming product release. If you have any further questions, call us at 714-582-1956.

 RDP MOA Reticle

Designed in conjunction with R&D Precision, the RDP MOA Reticle offers a very fine center crosshair that is 4 MOA on the vertical and horizontal axis that is only 0.07 MOA in thickness. This allows for shooting at very fine objects, or to allow long distance targets not to be covered by the crosshair. The lower vertical axis is broken into 2 MOA increments with a total of 40 MOA. The left and right side axis is divided into 5 MOA increments for a total of 30 MOA.

NOTE: This reticle is currently unavailable due to an upcoming product release. If you have any further questions, call us at 714-582-1956.

 PCMOA Scale Reticle

The PCMOA reticle in the LR-17PCMOA is based on the standard Shooters Minute of Angle, also known as Inch Per Hundred Yards (IPHY).  The reticle provides 40 MOA below the horizontal axis; 40 MOA above the horizontal axis and 40 MOA to the left and right of the vertical axis. 1 MOA increments are used on the horizontal axis up to 12 MOA. 1 MOA increments on the vertical and horizontal axes represent the first 11 marks; beyond 10 MOA the hash marks represent 2 MOA out to 40 MOA.  A 12-position rheostat illuminates the entire reticle red for low-light use.

NOTE: This reticle is currently unavailable due to an upcoming product release. If you have any further questions, call us at 714-582-1956.

 MDMOA Reticle

Another customer designed reticle in MOA, this reticle offers a total of 40 MOA on the lower vertical axis, 20 on the upper, and 30 MOA on the left and right axis of the horizontal. 1 MOA increments are used on all four axis for the finest ranging possible. A dot on each 10 MOA mark, the center 4 MOA of the crosshair, and the heavy duplex lines are lit with the optional lit reticle module.

NOTE: This reticle is currently unavailable due to an upcoming product release. If you have any further questions, call us at 714-582-1956.

You need to Login for joining waitlist.