Long Range Hunter

Perched on top of a hillside, glassing down range, you pick up movement at the edge of your reticle. Adjusting your aim to get a closer look, the clarity of the target becomes apparent just as it disappears from view. You play this game a few more times until the moment your target stands tall right in the center of your crosshair. Knowing you only have mere seconds until the game starts over, you squeeze the trigger and send a round speeding down range. With only a split second to make the shot of the season, you need the very best in optical clarity. U.S. Optics B-10, B-17, & B-25 scopes offer the absolute best glass money can buy, ensuring you see your target even in low light conditions.

 

B-10

The U.S. Optics B-10, 1.8-10x42 rifle scope is one of the most feature-packed medium-range optics currently available on the market. The B-10 comes standard with a single button illumination control that is integrated into the parallax knob, tool-less elevation zeroing with a revolution indicator, an EK2 Stop, a locking windage turret, and a locking elevation turret. You have the choice of the MIL-Scale GAP, Horus H425, or the MOA Scale Type 1 reticle. Our reticle selection is built to cater to all shooters whether you are military, law enforcement, competitor or hunter, you’ll find something that fits you. 

MSRP: $1,999.00*

*Additional $300.00 for Horus Vision Reticles

MIL-Scale GAP Reticle 

The MIL Scale GAP Reticle in the B-10 features full MIL and 1/2 MIL hash marks laid out in a clean display. The full MIL hash marks are numbered every 2 MILs for quick and easy reference. The hash marks represent a total of 9 MILs of adjustment below the horizontal axis, 4 MILs of adjustment above the horizontal axis, and 4 MILs of adjustment to the left and right of the vertical axis

 

.

Horus Vision H425 Reticle 

The Horus Vision H425 is designed for ease of use to meet the needs of the hunter and marksman alike. As part of the B-10 rifle scope, the H425 reticle includes an inverted ‘L’ range finder in the lower left quadrant that is calibrated in Shooter’s Minute of Angle (SMOA) or Inch Per Hundred Yards (IPHY) for quick and precise calculation of range and distances. The H425 grid has 8 horizontal stadia lines which represent 8 MILs of adjustment hold. The grid lines allow the shooter to correct for elevation and windage without turning knobs or counting clicks. The smaller, secondary horizontal lines allow for precise elevation holds with standard spacing between each line set at 1 MIL to compensate for wind, drift, speed of target, etc. 

Common Characteristics

  • Magnification: 1.8-10x
  • Exit Pupil Diameter: 3.2mm
  • Diopter: +2 to -3
  • Parallax Adjustment: 30yds to ∞
  • Field of View @ 1.8x: 36’ @ 100 yards
  • Field of View @ 10x: 11.3’ @ 100 yards
  • Eye Relief: 3.2” / 8.12cm
  • Objective Lens Housing Diameter: 2” / 50.80mm
  • Tube Diameter: 1.33” / 34mm
  • Overall Length: 12.98” / 329.6 mm
  • Objective Lens Diameter: 1.65” / 42mm
  • Ocular Lens Diameter: 1.40” / 35mm
  • Weight: 27.2oz / 0.77kg
  • Illumination: Red
  • Battery: Lithium Coin, CR2032
  • Battery Runtime: Up to 500 Hours
  • Material: Aluminum, 6061-T6
  • Finish Color: Matte Black

B-10 MIL Specifications

  • Elevation Knob: 1/10 MIL EREK 2
  • Elevation Travel*: 28 MILS
  • Windage Knob: US#5, 1/10 MIL
  • Windage Adjustment Range*: 14L / 14R
  • Reticle: MIL Scale GAP, First Focal Plane
  • *20 MOA Down

 

 

 

 

 

 

B17

B-17

The U.S. Optics B-17 3.2-17x50 rifle scope is packed with numerous durable features that assist any shooter in making the perfect shot. The B-17 comes standard with a single button illumination control that is integrated into the parallax knob, tool-less elevation zeroing with a revolution indicator, an EK2 Stop, a locking windage turret, and a locking elevation turret. We offer a wide range of reticles including; MIL-Scale GAP, MPR, GENIIXR, MGR, MDMOA, IGR, Horus Vision H102, Horus Vision H59, and the Horus Vision Tremor3 reticle. Regardless of your platform and shooting situation, we have the reticle for you. 

 

MSRP: $2,799.00*

*Additional $300.00 for Horus Vision Reticles

MIL-Scale GAP Reticle 

The MIL Scale GAP Reticle in the B-17 features full MIL and .5 MIL hash marks laid out in a clean display. The full MIL hash marks are numbered every 2 MILs for quick and easy reference. The hash marks represent a total of 9 MILs of adjustment below the horizontal axis, 4 MILs of adjustment above the horizontal axis, and 4 MILs of adjustment to the left and right of the vertical axis. 

GENIIXR Reticle 

The GENIIXR Reticle in the B-17 features hold over points below zero to better facilitate range estimation and trajectory compensation. The reticle incorporates alternating hash marks and dots that are spaced out in .5 MIL increments. The hash marks and dots represent 5 MILs of total elevation adjustment above the horizontal axis, 10 MILs of elevation adjustment below the horizontal axis, and 5 MILs of windage adjustment to the left and right of the vertical axis.  

 

 

MGR Reticle 

Designed by U.S. Optics, this MIL based reticle offers full MIL, .5 MIL and .2 MIL hash marks. The open center features a broken cross to provide a clear view of the shooter’s groupings, while the fine crosshairs present a clear and crisp image without obscuring the target. The MGR provides 6 MILs of wind and 11 MILs of elevation holdovers. 

MPR Reticle 

The MIL Scale MPR Reticle in the B-17 is one of the most versatile reticles when it comes to providing MIL ranging capability.  The hash marks can be used to provide ranging and hold-over reference points as low as .2 MILs and up to 10 MILs on the left and right of the horizontal axis, and from .2 MILs to 15 MILs from top to bottom of the vertical axis. A total of 10 MILs of adjustment are below the horizontal axis, 5 MILs of adjustment are above the horizontal axis, and 5 MILs of adjustment to the left and right of the vertical axis. 

IGR Reticle 

Designed by U.S. Optics, this MOA based reticle offers 1 MOA out to 10 MOA marks. The open center features a broken cross to provide a clear view of the shooter’s groupings, while the fine crosshairs present a clear and crisp image without obscuring the target. The IGR provides 30 MOA on upper and 60 MOA on lower vertical axis, while providing 30 MOA left and right on the horizontal axis. 

MDMOA Reticle 

The MDMOA Reticle in the B-17 is based on the standard Shooters Minute of Angle, also known as Inch Per Hundred Yards (IPHY). The reticle provides 40 MOA of adjustment below the horizontal axis, 20 MOA of adjustment above the horizontal axis, and 30 MOA to the left and right of the vertical axis. 1 MOA increments are used on all four axes for the finer ranging capability. Dots located on each 10 MOA marks, the center of the crosshair (4 MOA total). 

Horus Vision H102 Reticle 

The Horus Vision H102 in the B-17 was designed for the entry-level rifleman, designated marksman or sniper. Features include, but are not limited to, targeting ovals, leads for moving targets and a rangefinder. The grid pattern represents a total of 27 MILs of adjustment below the horizontal axis, 30.5 MILs of adjustment above the horizontal axis, and 30.5 MILs of adjustment to the left and right of the vertical axis. The H102 also allows for wind correction as well as leading targets moving up to 60 miles per hour. 

 

 

Horus Vision H59 Reticle 

The Horus Vision H59 Reticle is a “field-tuned” version of the Horus Vision H58. Horus widened the horizontal grid by 1 MIL for increased wind holdover. The center cross has been turned into a “broken cross” so groupings are less obscured and more easily seen. 

Horus Vision Tremor™3 Reticle 

Based on the Tremor2 reticle, Horus Vision has added Rapid Range Bars above the main horizontal stadia, more holdover dots for an expanded uncluttered grid, and extra Speed-Shooting Guides along the 1-mil horizontal stadia. The Tremor™3 reticle also features Moving Target Holds and wind guides found in the Tremor2. 

Common Characteristics

  • Magnification: 3.2-17x
  • Exit Pupil Diameter: 3mm
  • Diopter: +2 to -3
  • Parallax Adjustment: 50yds to ∞
  • Field of View @ 3.2x: 25.25’ @ 100 yards
  • Field of View @ 17x: 8.03’ @ 100 yards
  • Eye Relief: 3.2” / 8.12cm
  • Objective Lens Housing Diameter: 2.3” / 58.4mm
  • Tube Diameter: 1.33” / 34mm
  • Overall Length: 15.02” / 381.50mm
  • Objective Lens Diameter: 1.96” / 50mm
  • Ocular Lens Diameter: 1.40” / 35mm
  • Weight: 31.1oz / .88 kg
  • Reticle Illumination: Red
  • Battery: Lithium Coin, CR2032
  • Battery Runtime: Up to 500 Hours
  • Material: Aluminum, 6061-T6
  • Finish Color: Matte Black
  • Finish Type: Type III Hard Anodized

B-17 MIL Specifications

  • Elevation Knob: 1/10 MIL EREK
  • Elevation Travel*: 24 mils
  • Windage Knob: US#5, 1/10 MIL
  • Windage Adjustment Range*: 12L / 12R
  • Reticle: MIL Scale GAP, First Focal Plane
  • *20 MOA Down

 

 

 

 

B-25

B-25 

The U.S. Optics B-25 5-25x52 rifle scope is one of the most feature packed long range optics available on the market. The B-25 comes standard with a single button illumination control that is integrated into the parallax knob, tool-less elevation zeroing with a revolution indicator, an EK2 Stop, a locking windage turret, and a locking elevation turret. We offer a wide range of reticles including; MIL Scale GAP, GENIIXR, MPR, MDMOA, IGR, MGR, PR2, Horus Vision H37, Horus Vision H59, Horus Vision H102, and the Horus Vision Tremor3 reticle. Regardless of your platform and shooting situation, we have the reticle for you. 

MSRP: $3,349.00*

*Additional $300.00 for Horus Vision Reticles

B-25 Reticles

MIL-Scale GAP Reticle 

The MIL Scale GAP Reticle in the B-25 features full MIL and .5 MIL hash marks that are laid out in a clean display. The full MIL hash marks are numbered every 2 MILs for quick and easy reference. The hash marks represent a total of 9 MILs of adjustment below the horizontal axis, 4 MILs of adjustment above the horizontal axis, and 4 MILs of adjustment to the left and right of the vertical axis. 

GENIIXR Reticle 

The GENIIXR Reticle in the B-25 features hold over points below zero to better facilitate range estimation and trajectory compensation. The reticle incorporates alternating hash marks and dots that are spaced out in .5 MIL increments. The hash marks and dots represent 5 MILs of total elevation adjustment above the horizontal axis, 10 MILs of elevation adjustment below the horizontal axis, and 5 MILs of windage adjustment to the left and right of the vertical axis. 

 

 

MPR Reticle 

The MIL Scale MPR Reticle in the B-25 is one of the most versatile reticles when it comes to providing MIL ranging capability.  The hash marks can be used to provide ranging and hold-over reference points as low as .2 MILs and up to 10 MILs on the left and right of the horizontal axis, and from .2 MILs to 15 MILs from top to bottom of the vertical axis. A total of 10 MILs of adjustment are below the horizontal axis, 5 MILs of adjustment are above the horizontal axis, and 5 MILs of adjustment to the left and right of the vertical axis. 

MDMOA Reticle 

The MDMOA Reticle in the B-25 is based on the standard Shooters Minute of Angle, also known as Inch Per Hundred Yards (IPHY). The reticle provides 40 MOA of adjustment below the horizontal axis, 20 MOA of adjustment above the horizontal axis, and 30 MOA to the left and right of the vertical axis. 1 MOA increments are used on all four axes for the finer ranging capability. Dots located on each 10 MOA marks, the center of the crosshair (4 MOA total), and the heavy duplex lines are illuminated red. 

MGR Reticle 

Designed by U.S. Optics, this MIL based reticle offers full MIL, .5 MIL and .2 MIL hash marks. The open center features a broken cross to provide a clear view of the shooter’s groupings, while the fine crosshairs present a clear and crisp image without obscuring the target. The MGR provides 6 MILs of wind and 11 MILs of elevation holdovers. 

IGR Reticle 

Designed by U.S. Optics, this MOA based reticle offers 1 MOA out to 10 MOA marks. The open center features a broken cross to provide a clear view of the shooter’s groupings, while the fine crosshairs present a clear and crisp image without obscuring the target. The IGR provides 30 MOA on upper and 60 MOA on lower vertical axis, while providing 30 MOA left and right on the horizontal axis. 

PR2 Reticle 

The PR2 Reticle was designed with the precision rifle shooter in mind.  The fine reticle features 10 MILs of holdovers (left and right), as well as 10 MILS on the upper and lower axis in .5 MIL increments. The broken cross hairs allow for precise target visibility, while the full size IPSC target and 12-inch square steel target allow for quick ranging at 250, 500, 750, and 1000 yards. 

Horus Vision H37 Reticle 

Designed and patented by Horus Vision, the H37 offers a MIL based reticle that works with or without the optional Horus Ballistic software. Please see Horus Vision’s website for complete instructions on the use of this reticle. 

(Limited Stock)

Horus Vision H59 Reticle 

The Horus Vision H59 Reticle is a “field-tuned” version of the Horus Vision H58. Horus widened the horizontal grid by 1 MIL for increased wind holdover. The center cross has been turned into a “broken cross” so groupings are less obscured and more easily seen. 

Horus Vision H102 Reticle 

The Horus Vision H102 in the B-25 was designed for the entry-level rifleman, designated marksman or sniper. Features include, but are not limited to, targeting ovals, leads for moving targets and a rangefinder. The grid pattern represents a total of 27 MILs of adjustment below the horizontal axis, 30.5 MILs of adjustment above the horizontal axis, and 30.5 MILs of adjustment to the left and right of the vertical axis.  The H102 also allows for wind correction as well as leading targets moving up to 60 miles per hour. 

 

 

Horus Vision Tremor™3 Reticle 

Based on the Tremor2 reticle, Horus Vision has added Rapid Range Bars above the main horizontal stadia, more holdover dots for an expanded uncluttered grid, and extra Speed-Shooting Guides along the 1-mil horizontal stadia. The Tremor™3 reticle also features Moving Target Holds and wind guides found in the Tremor2. 

Common Characteristics

  • Magnification: 5-25x
  • Exit Pupil Diameter: 2 mm
  • Diopter: +2 to -3
  • Parallax Adjustment: 75yds to ∞
  • Field of View @ 5x: 16.08’ @ 100 yards
  • Field of View @ 25x: 5.25’ @ 100 yards
  • Eye Relief: 3.2” /8.12 cm
  • Objective Lens Housing Diameter: 2.38” / 60.48mm
  • Tube Diameter: 1.33” / 34mm
  • Overall Length: 17.93” /455.42mm
  • Objective Lens Diameter: 2.04” / 52mm
  • Ocular Lens Diameter: 1.40” / 35mm
  • Weight: 34.9oz /0.99kg
  • Reticle Illumination: Red
  • Battery: Lithium Coin, CR2032
  • Battery Runtime: Up to 500 Hours
  • Material: Aluminum, 6061-T6
  • Finish Color: Matte Black

B-25 MIL Specifications

  • Elevation Knob: 1/10 MIL EREK 2
  • Elevation Travel*: 22 MILS
  • Windage Knob: US#5, 1/10 MIL
  • Windage Adjustment Range*: 10L / 10R
  • Reticle: MIL Scale GAP, First Focal Plane
  • *30 MOA Down

 

 

 

 

You need to Login for joining waitlist.